fw_peedi_rev.A_v9.7.bin (08.07.2009) - Added a common OS awareness support ("info threads" for Linux, eCos and others) - Added support for STRATA Flash with write buffer 512 bytes fw_peedi_rev.A_v9.6.bin (12.06.2009) - Added Freescale PowerPC MPC5200 support - Added Atmel AVR32 support - Added Cortex-M3 SWD support - Added LPC2917 support - Added reset detect command - Fixed Blackfin Multicore support - New version system (9.6.54 means: year 2009, month 06, unique build number 56) fw_peedi_rev.A_v7.5.0.bin (17.02.2009) - Added MIPS32 support (PIC32, ADM5120) - Added DCC support for XScale (allows to have a U-BOOT or Linux console without a serial port) fw_peedi_rev.A_v7.4.0.bin (09.12.2009) - Added Cortex-A8 support (OMAP3, OMAP35xx) - Added Freescale PowerPC MPC5510 support - Added Freescale PowerPC MPC8321/3 support fw_peedi_rev.A_v7.1.0.bin (22.08.2008) - Added unique serial number support in FLASH programmer - Added EON EN29LV320 into the PEEDI FLASH database - Corrected FLASH ID get sequence - Fixed NAND bad block handling on iMX31 - Improved MMC/SD card support (now supports 1GB, 2GB and 4GB cards) fw_peedi_rev.A_v7.0.0.bin (10.07.2008) - Added Cortex-M3 support - Added ST STM32 FLASH support - Added new GDB registers frame support for MPC5500 targets - Fixed MPC5500 watchpoint support - Fixed NAND FLASH verify - Made DBGREQ_OUTPUT available for all JTAG targets - Licenses can be loaded from an external file - Added AT91SAM7 "flash this secure" command fw_peedi_rev.A_v6.1.0.bin (10.06.2008) - Added PXA320 support - Added Intel 28F512P30B fw_peedi_rev.A_v6.0.0.bin (27.05.2008) - Added PowerQUICC II Pro MPC83XX support - Added Freescale MPC8313 NAND FLASH support - Added Intel P33 FLASH support - Added beep CLI command - Improved TFTP support - download of files bigger than 32MB - Fixed wait command on target disconnect - Fixed BFIN connect procedure - Fixed closing of remote GDB connection - Fixed watchpoint count handling on most targets - Made COREn_MEMMAP available for Blackfin fw_peedi_rev.A_v5.3.0.bin (20.03.2008) - Added NXP LPC2000 SPI FLASH support - Added TI TMS470R1VF688 and TMS470R1VF689 FLASH support - Added periodic TI TMS470 AWD kick - Added TI OMAP CPU support fw_peedi_rev.A_v5.2.0.bin (25.01.2008) - Reworked "reset" CLI command to allow different reset types without changing the configuration file fw_peedi_rev.A_v5.1.0.bin (22.01.2008) - Added Blackfin SPI Flash Programming fw_peedi_rev.A_v5.0.0.bin 10.01.2008) - Added ARM11 support - Added Freescale iMX31 NAND Flash hardware ECC generation fw_peedi_rev.A_v4.5.0.bin (28.11.2007) - reworked Blackfin connect procedure - added support for BF561 - corrected small bug in ADP debug protocol fw_peedi_rev.A_v4.4.0.bin (04.10.2007) - Added TI DaVinci DM644x support - Added automatic generation of NAND Flash UBL descriptors for DaVinci DM644x - Updated AT91SAM7 Flash Programmer fw_peedi_rev.A_v4.3.0.bin (10.09.2007) - Added JTAG_TDO_DELAY CFG parameter - Added Analog Devices Blackfin NAND FLASH programming support - Added Atmel AT91SAM9263 DataFlash programming support - Added Freescale MCF5272 BDM support fw_peedi_rev.A_v4.1.0.bin (29.06.2007) - Corrected small bugs in MPC55xx - Added 28F128W30 in the flash database fw_peedi_rev.A_v4.0.2.bin (28.06.2007) - Added Analog Devices Blackfin debug support - Added Analog Devices Blackfin FLASH programming support - Added Blackfin virtual memory support - Added memory and/or commands - Added flash multi verify and flash multi blank commands fw_peedi_rev.A_v3.3.1.bin (25.04.2007) - Corrected IDCODE database: added Freescale i.MX1 and Xilinx X2C CPLDs - Added new devices in the Flash database - Corrected bug in "flash program" for STR7 chips - Corrected bug in "flash blank" for NAND chips fw_peedi_rev.A_v3.1.0.bin (06.04.2007) - Added Freescale ColdFire debug support - Added CLI over RS232 - Reworked ELF reader - Updated MAC7100 Flash Programmer fw_peedi_rev.A_v2.0.0.bin (05.11.2006) - Added Freescale Nexus enabled MPC5500, MPC55XX debug support - Added Freescale MPC5500, MPC55XX Flash programming support - Added NAND Flash JFFS2 support fw_peedi_rev.A_v1.13.bin (28.08.2006) - Added NAND FLASH support - Optimized connecting to XSCALE CPUs - Added ALLOW_ZERO_KEYS parameter in TMS470 family FLASH section - Added COREn_PATH (default path per core) configuration parameter in TARGET section - Added COREn_FILE (default file per core) configuration parameter in TARGET section - Changed file path convention - FILE_XXXX parameters replaced by single FILE parameter in FLASH sections - Added memory verify command - Added flash dump command - Added clock command - Added execution of the scripts defined in target configuration file from CLI - Added support of using expression instead of a value in the commands fw_peedi_rev.A_v1.12.bin (02.07.2006) - Added Atmel DataFlash support - Added TI TMS470 series microcontroller support - Added ucLinux debugging support - Added DCC over TCP support - Added memory multi load command - Improved XScale exception vectors handling fw_peedi_rev.A_v1.10.bin (12.04.2006) - added XScale series support - added ST STR7 series support - reworked Flash Programmer when using SREC/IHEX files fw_peedi_rev.A_v1.9.bin (19.03.2006) - corrected a minor bug (MAC7100 ) - removed parameter STARTUP_TIME - complemented target connect procedure fw_peedi_rev.A_v1.8.bin (11.03.2006) - added MAC7100 support - added Dualcore support - added parameter WAKEUP_TIME in cfg file - reworked target connect procedure fw_peedi_rev.A_v1.7.bin (26.02.2006) - complemented Multi-Core support - corrected a bug in debugging ABORT state fw_peedi_rev.A_v1.6.bin (11.02.2006) - add auto checksum at addr 0x14 for LPC2xxx - corrected big-endian bug - corrected IHEX/SREC bug fw_peedi_rev.A_v1.5.bin (18.01.2006) - complemented Multi-Core support fw_peedi_rev.A_v1.4.bin (25.12.2005) - added LPC2xxx support fw_peedi_rev.A_v1.3.bin (28.11.2005) - added ADP debug protocol support - added partition support for the MMC/SD card fw_peedi_rev.A_v1.2.bin (03.10.2005) - multi core support (extra license is required) - multi flash support - auto FLASH program after target power detect fw_peedi_rev.A_v1.1.bin (23.08.2005) -added STARTUP_MODE parameter in config file - target connect procedure improvment fw_peedi_rev.A_v1.0.bin (14.06.2005) - first release