;--------------------------------------------------------------------------
;
;
;   PEEDI sample target configuration file
;
;   Ronetix
;
;   Supported devices   : EFM32
;
;   Revision            : 1.0
;
;   Date                : December 8, 2010
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate.
;
; These licenses must be filled before using this file.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2007, 1111-1111-1111-1
;       KEY         = CORTEXM3, 2222-2222-2222-2
;
; The minimum required licenses are provided when PEEDI is purchased and 
; are printed on the bottom side of PEEDI.
;

[LICENSE]
; the license keys for one or more PEEDIs can be loaded from an external file
FILE = eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL                = gdb_remote ; gdb remote
REMOTE_PORT             = 2000      ; TCP/IP port
GDB_READ_INGNORE_TIME   = 3000

[TARGET]
PLATFORM                = CortexM3_SWD  ; platform is ARM

[PLATFORM_CortexM3_SWD]
SWD_CLOCK              = 100, 5000 ; JTAG Clock in [kHz]
TRST_TYPE               = PUSHPULL  ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME              = 100         ; length of RESET pulse in ms; 0 means no RESET
CORE0                   = CortexM3  ; TAP is CortexM3  CPU
CORE0_STARTUP_MODE      = RESET     ; stop the core immediately after reset
CORE0_ENDIAN            = LITTLE    ; core is little endian
CORE0_BREAKMODE         = SOFT      ; breakpoint mode
CORE0_INIT              = INIT_EFM32 ; init section for AT91SAM7S64 
CORE0_FLASH             = FLASH_EFM32; FLASH section parameters
CORE0_WORKSPACE         = 0x20000000, 0x4000

[INIT_EFM32]

[FLASH_EFM32]
CHIP            = EFM32              ; flash chip
ACCESS_METHOD   = AGENT             ; use agent programming
FILE            = "tftp://192.168.0.1/myfile.bin" 0 ; file to program
AUTO_ERASE      = NO                ; erase before program

[SERIAL]                            ; serial port configuration
BAUD            = 115200
STOP_BITS       = 1
PARITY          = NONE
TCP_PORT        = 0

[TELNET]
PROMPT          = "efm32> "         ; telnet prompt
;BACKSPACE      = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS      = 20                ; LED indicator brightness
VOLUME          = 25                ; beeper volume

[ACTIONS]                           ; user defined scripts
;AUTORUN        = 2                 ; executed on every target connect
1 = erase
2 = prog
3 = dump_ram
4 = dump_flash

[erase]                             ; erase flash
flash erase

[prog]                              ; program flash
flash prog

[dump_ram]                          ; dump RAM
memory dump 0x20000000 0x10000 tftp://192.168.0.1/ram.bin

[dump_flash]                        ; dump FLASH
memory dump 0x00000000 0x20000 tftp://192.168.0.1/flash.bin