;--------------------------------------------------------------------------
;
;
;	PEEDI sample target configuration file
;
;	Ronetix
;
;	Supported devices	: Atmel ATSAM3S
;
;	Revision			: 1.0
;
;	Date				: November 12, 2010
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.3.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE = eep://license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL 			= gdb_remote ; gdb remote
REMOTE_PORT			= 2000		; TCP/IP port
DROP_ON_RESET 		= NO

[TARGET]
PLATFORM 			= CortexM3	; platform is ARM

[PLATFORM_CortexM3]
JTAG_CHAIN 			= 4      		; list of TAP controllers in the JTAG chain
JTAG_CLOCK 			= 50, 1000		; JTAG Clock in [kHz]
TRST_TYPE 			= OPENDRAIN		; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME 		 	= 0				; length of RESET pulse in ms; 0 means no RESET
CORE0 		 		= CortexM3		; TAP is CortexM3  CPU
CORE0_STARTUP_MODE 	= RESET			; stop the core immediately after reset
CORE0_ENDIAN	 	= LITTLE 		; core is little endian
CORE0_BREAKMODE 	= HARD, 0x08000000, 0x08020000	; breakpoint mode
CORE0_WORKSPACE		= 0x20000000, 0x4000
CORE0_INIT		 	= INIT_SAM3 	; init section for AT91SAM7S64 
CORE0_FLASH		 	= FLASH_SAM3	; FLASH section parameters

[INIT_SAM3]
;set pc 0							; set PC and SP to avoid gdb complaining
;set sp 0x20004FFC					; when FLASH is empty

[FLASH_SAM3]
CHIP				= AT91SAM3S4	; flash chip
FILE				= "tftp:example1_rom.bin", 0 ; file to program
AUTO_ERASE			= NO			; erase before program
AUTO_LOCK			= NO
SECURE_FLASH		= NO

[SERIAL] 							; serial port configuration
BAUD				= 115200
STOP_BITS			= 1
PARITY				= NONE
TCP_PORT			= 0

[TELNET]
PROMPT 				= "sam3> "		; telnet prompt
;BACKSPACE			= 127			; comment out for autodetect

[DISPLAY]
BRIGHTNESS			= 20			; LED indicator brightness
VOLUME				= 25			; beeper volume

[ACTIONS]							; user defined scripts
;AUTORUN 			= 2				; executed on every target connect
1 = erase
2 = prog
3 = dump_ram
4 = dump_flash

[erase]								; erase flash
flash erase

[prog]								; program flash
flash prog

[dump_ram]							; dump RAM
memory dump 0x20000000 0x5000 tftp://192.168.0.1/ram.bin

[dump_flash]						; dump FLASH
memory dump 0x00000000 0x20000 tftp://192.168.0.1/flash.bin