;-------------------------------------------------------------------------------
;
;                                   avr32uc.cfg
;                                   -----------
;
;   PEEDI target configuration file for ALVIDI AT32UC3A1512 evaluation board
;
;
;   Ronetix
;
;   Supported devices   : AT32UC3A1512
;
;   Revision            : 1.0
;
;   Date                : June 3, 2009
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;-------------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.3.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE=eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
REMOTE_PORT             = 2000          ; TCP/IP port

[TARGET]
PLATFORM                = AVR32         ; platform is

[PLATFORM_AVR32]
JTAG_CHAIN              = 5             ; list of IR lenght of all TAP controller in JTAG chain
JTAG_CLOCK              = 1000     		; JTAG Clock in [kHz] - 100kHz jtag clock for init operations and 8MHz for normal work
TRST_TYPE               = PUSHPULL      ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME              = 20           ; lenght of RESET pulse in ms; 0 means no RESET
WAKEUP_TIME             = 200
TIME_AFTER_RESET		= 200

CORE0                   = AVR32UC3      ; TAP is AVR32UC CPU
CORE0_STARTUP_MODE      = RESET
CORE0_BREAKMODE         = SOFT          ; breakpoint mode:
                                        ; soft - software breakpiont
                                        ; hard - use hardware breakpoints instead of software
CORE0_LOCKOUT_RECOVERY	= NO 			; do not erase chip if secured
CORE0_USE_BLOCK_ACCESS  = NO            ; NO or ADDRESS, LENGTH
CORE0_INIT              = INIT_AVR32UC  ; init section
CORE0_FLASH0            = FLASH_AVR32UC ; flash section parameters
CORE0_ENDIAN            = BIG           ; core is big endian
CORE0_PATH              = "tftp://192.168.3.60"
CORE0_FILE              = "test32k.bin"

[INIT_AVR32UC]

[FLASH_AVR32UC]
CHIP                = AT32UC
FLASH_SIZE			= 512				; Flash size in Kbytes
FILE                = "test256k.bin", bin, 0x80000000

[SERIAL]                                ; serial port configuration
BAUD                = 115200
STOP_BITS           = 1
PARITY              = NONE
TCP_PORT            = 0

[TELNET]
PROMPT              = "avr32uc> "       ; telnet prompt
;BACKSPACE          = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS          = 20                ; LED indicator brightness
VOLUME              = 25                ; zummer volume

[ACTIONS]                               ; user defined scripts
1 = erase
2 = prog

[erase]                                 ; erase flash
flash erase

[prog]                                  ; program flash
flash program